When To Use Primer Before Painting


When To Use Primer Before Painting
By Tony Evans

Do you need to prime before you paint? This is a question that I hear quite often as a professional painting contractor. There are many instances where you will need to prime a surface before you paint but priming is not always required. In this article we will look at times when using a primer is necessary not only for a nicer finish but also how using a primer can actually save you money by using less paint.

Whenever you are going to paint newly installed sheet rock, using a primer is essential. New sheet rock that has been skim coated with joint compound leaves a very absorbent surface which will need several coats of paint if you do not prime it first. If you use a good quality primer before you paint, the primer will seal the pores which will need less top coats of paint. Doing this will also leave a much nicer finish and create a stronger bond between the drywall and your paint.

Next, if you have walls that are stained with water spots, grease or other markings using an oil based primer before you paint is necessary. If you don’t use a primer first before you paint over stains, the stain will bleed through your fresh paint. Additionally, smoke or cigarette stains must also be primed first. Not only will these types of stains bleed through your new paint but also the odors from smoke or cigarette stains can often be noticed if not primed first. If you have only one or two stains on your wall then you can just spot prime those stains in lieu of priming the entire room.

Also, if you are changing colors and the color that you are changing to is vastly different, then I would recommend using a primer first. Priming your walls first will again require less finish coats of paint. You can have your primer tinted to your new paint color which will also help by requiring less coats of paint.

If you have any mildew on your walls you will need to prime these areas also. But, before you prime mildew stains you must first clean the mildew stains using household bleach and water. Make a mixture of about 10 parts bleach to about 90 parts water and apply it with a rag or sponge to all areas which has visible mildew. Once the surface has thoroughly dried, you can then prime this area.

As a good rule of thumb, if you are going to paint any unpainted surface you are probably going to need to use a primer first. Any metal surface will require a primer in order to create a bond between the metal and the paint. Using a primer will also help in protecting the metal surface from corrosion and rust. Any unpainted wood will require a primer as well. If you fail to prime unpainted wood the paint will begin to peel in a short time. Priming creates a seal between the wood and the paint which enables it to bond. The same is true for other unpainted surfaces such as brick, stone or concrete.

Primers are available in both oil based and water based. If you are going to use primer to cover any stains or unpainted surfaces, it is a good idea to always use an oil based primer.